- 1. Introduction
- 2. Products & Services
- 3. O-Ring Basics
- 4. Seal Types & Gland Design
- 5. Environmental Factors
-
6. Material Selection Guide
- Basic Concepts of Rubber
- Aflas
- Buna-N
- Butyl
- Chemraz®
- Epichlorohydrin
- Ethylene-Propylene
- Fluorocarbon (Viton)
- Fluorosilicone
- Natural Rubber
- Neoprene® (Chloroprene)
- Nitrile (Buna-N)
- Hydrogenated Nitrile
- Perfluoroelastomer®
- Polyacrylate
- Polyurethane, Cast
- Polyurethane, Millable
- Silicone
- Liquid Silicone Rubber
- Medical Grade Silicone
- Styrene Butadiene
- Teflon® Virgin
- Vamac® [Ethylene / Acrylic]
- Thermoplastic Elastomers
- Cautionary Note
- Tables
-
7. Special Elastomer Applications
- Friction
- Rotary Application
- Extreme High Temperature
- Low Temperature Situations
- Abrasion Resistance
- FDA Food Applications
- Medical Applications
- NSF Applications
- Under. Lab. Recognized Comp.
- Water and Steam Sterilization
- Gamma Sterilization
- ETO Sterilization
- Automotive Fuels
- Brake Fluid Applications
- Contact with Plastic Surfaces
- Low Permeability
- Vacuum Situations
- Outgassing
- Compression Set Resistance
- Drive Belt Applications
- Age Control/Shelf Life
- Compound Colorization
- Automatic Assembly
- EMI Shielding
- Conc. Acids at Elevated Temp.
- O-Ring Lubricant Guide
- 8. Troubleshooting
- 9. Sizes & How to Order
- 10. Glossary of Terms
- 11. Technical Summary
- 12. Bibliography & Trademarks
Cautionary Note
There are three useful tables for you to view and compare the properties and compatibility of materials and chemicals.
These tables are:
Downloads
- Material Selection GuidePrint Version PDF (338K)
- Seal Design GuidePrint Version PDF (34.6MB)
Phone and Fax
Toll Free: (800) 828-7745 (US / CAN)
International: (+1) 716 684-6560
Local: (716) 684-6560
Fax: (716) 684-8302